Are you having trouble using Anyview Cast on your Hisense TV? What is the issue, and how can you fix it?
If Anyview Cast is not working on Hisense, you might be dealing with a network issue that interferes with your smart device and TV connection.
However, the problem might be due to several other reasons, such as software or firmware glitches, app update issues, and incompatible phones, among others.
Below, we have compiled a detailed guide on issues you might experience using Anyview Cast on Hisense TV. We have also included various tips on how to fix the situation so that you can enjoy a stress-free viewing experience.
Why is Anyview Cast on Hisense TV not working?
Reasons why you might have issues with screen mirroring on Hisense Smart TV:
- Your smart device and TV are not connected to the same network.
- There is a connectivity issue with your Wi-Fi network.
- Your Anyview app is not up to date.
- Glitches affecting your TV, phone, or Wi-Fi router
- Your phone does not support casting
- Anyview cast is not activated on your TV
How to fix Hisense TV is not casting issues
If Anyview Cast is not working, you can use the following solutions to fix the issue:
1. Make sure that your Wi-Fi network is working properly
For Anyview Cast to work, your smartphone and Hisense TV must be connected to the same wireless network.
If your phone is connected to another network, say, mobile broadband, you will not be able to cast.
2. Make sure Anyview Cast is activated on your TV
Anyview Cast must be activated on your TV for you to stream content from your device. With some TV models, the feature is activated automatically.
However, other TVs might require you to activate the feature manually, which could be the issue.
To activate Anyview Cast:
- Press the Home button on your TV and select Settings.
- Next, go to System, then Network.
- Under Network Settings, make sure Anyview Stream is set to on.
With Anyview Stream activated, you can go to your Hisense TV input menu and select Anyview Cast to start streaming.
3. Reset your phone
Are you unable to cast iPhone or Android on Hisense using Anyview?
The problem could likely be on your phone. Minor issues, such as glitches in the phone’s software or settings, can interfere with the casting or even connecting the phone to your TV.
Fortunately, you can easily resolve most of these minor issues by rebooting your phone. However, if you still have trouble casting after rebooting, you can try resetting the network settings or even performing a factory reset.
If the solutions above fail, you can try switching to another mobile device. However, if other devices don’t work, the problem lies somewhere else, like your Wi-Fi network or TV.
4. Reset your router
As already stated, your Hisense TV and smartphone must be on the same network for the casting to work.
No internet connection is necessary, as both devices only need to connect to each other wirelessly. However, it is possible to have glitches in your router, which interfere with the communication, making casting impossible.
Nonetheless, such glitches are minor, and you can fix them by rebooting your router. You can reboot it using the hard reset button (located at the back panel of most routers).
Alternatively, you can power cycle it (disconnect it from power for about 60 seconds or so, then power it back on).
5. Reset your TV
Using Anyview Cast might also be problematic if there are issues with your TV. Such issues might include glitches in the network settings, bugs in the software or firmware, and glitches with the Anyview Cast, among others.
To fix these issues, you can try rebooting the TV, which can help to fix most minor glitches in the casting app, firmware, or even the settings.
You can reboot the TV by power cycling it – unplugging the TV from the power outlet when it is still on, waiting about one minute, and then powering it back on.
If the issue persists, you can factory reset the TV, which will wipe all settings, restoring it to the default mode. To perform a factory reset:
- First, go to Menu on your TV remote.
- Next, navigate to Support and select Self-Diagnosis.
- Under Self Diagnosis, select Reset and enter your PIN (the default PIN code is 0000).
- Wait for your TV to complete the reset process the set it up afresh.
- After completing the setup, connect your phone and TV using Anyview Cast.
Anyview Cast is a great application for streaming content from your smart devices to the TV. Unfortunately, from time to time, you might experience issues connecting to your devices.
However, with the information above, you can fix most of these solutions and watch your content on a bigger, brighter, and clearer screen.